|
 Electronic
ignition has long been recognized as a means of increasing a car's
efficiency. It does this simply by burning the fuel very much
more effectively than is possible with any traditional contact
breaker "points" system.
Install
an Electronic Ignition kit and you'll never have to replace or
service the points ignition again.
Save
money with reduced ongoing costs for parts and servicing,
as well as from improved fuel economy.
Enjoy
better performance and reliability from your car, plus
improved starting in cold conditions.
HOW
IT WORKS
THE OPTICAL
SWITCH (MOUNTED IN THE DISTRIBUTOR)
 An
infra red light beam is detected by a silicon phototransistor.
This beam is interrupted by a revolving chopper fixed to the distributor
cam and has one blade for each cylinder. It is unaffected by light,
dirt and dampness. The optical switch is fixed to the same plate
as the points were, so that speed and vacuum advance remain unchanged.
THE POWER
MODULE
This receives the electronic pulses
from the optical switch and using an internal high power Darlington
transistor charges the coil. The exact positioning of the chopper
determines spark timing. Dwell time is determined either by the
width of the chopper or internally to give variable dwell performance.
THE FITTING
KIT
|
Example
of a fitting kit for
a 4 cylinder engine
(actual contents may vary)
|
In order to mount the optical switch
in exactly the right position in the distributor, specifically
engineered mounting plates and brackets have been developed to
ensure perfect installations and in the vast majority of cases,
without any permanent modifications.
Installation is possible without
any special tools.
OPTRONIC
IGNITION
FEATURES
- Contactless operation.
- High power
output transistor gives fast and accurate switching of the coil.
- Fixed dwell
gives higher performance from existing coil under all conditions.
- Fully compatible
with Lumenition engine rev limiters for complete engine protection.
TECHNICAL
SPECIFICATION
| Power
Module |
|
| Supply
Voltage |
+5
+16 volts |
| Temperature
Range |
-40
to 85°C |
| Stability |
+/0.5°
spark angle |
| Coil
Current |
7
amps max. |
| RPM
Range |
up
to 16,000 rpm (4 cylinder) |
| (reverse
and over voltage protected) |
| |
| Optical
Trigger |
|
| Operating
Temperature |
-40 to
+125°C |
| Operating
Voltage |
5 to
10 volts |
| Operating
Consumption |
25mA |
All ignition
kits come with a 1 year manufacturer's warranty
DISTRIBUTOR
FITTING KITS
Lumenition
have engineered a complete range of distributor fitting kits that
contain all the necessary choppers, adapters, screws, grommets
etc, to ensure an OEM standard installation is achieved.
Most makes
of distributor are covered including Lucas, Bosch, Ford, Ducellier,
Mitsubishi, Motorcraft, Mallory, Nippon Denso, Hitachi, LADA,
SEV, A.C. Delco.
CAR
MAKES
Below is a
list of the most popular makes of car that kits are available
for.
|
Alfa
Romeo
American Motors
Aston Martin
Audi
Austin Healey
Austin Rover
Bentley
B.M.W.
British Leyland
Chevrolet South Africa
Chrysler Europe
Citroen
Colt
Daf
Daihatsu
Daimler
Datsun
Fiat
Ford Australasia
Ford Europe
Ford USA
General Motors (Austalian)
General Motors (USA)
|
Hillman/Humber
Holden
Honda
Hyundai
Innocenti (Italy)
Jaguar/Daimler
Jensen
Lada
Lancia
Land Rover
Leyland
Lotus
Maserati
Matra
Mazda
Mercedes-Benz
M.G.
Mitsubishi
Morgan
Morris
Nissan-Datsun
Opel
Peugeot
|
Porsche
Range Rover
Reliant
Renault
Rolls Royce
Rover<
Saab
Seat
Simca
Singer
Skoda
Subaru
Sunbeam
Suzuki
Talbot
Toyota
Triumph
Vauxhall& Opel
Volkswagen
Volvo
Wolseley
Yugo/Zastava
|
COMMERCIAL
VEHICLES
|
Bedford
(Opel)
Commer
Daihatsu
Datsun (Nissan)
Dodge
|
Ford
Land Rover
Leyland - Freight Rover
Mazda
Mercedes-Benz
|
Mitsubishi
Nissan
Toyota
Volkswagen
|
MARINE
ENGINES
Optronic
Ignition Kit Price
There are
two components to the Optronic ignition system - the Optronic
Ignition Kit and a Fitting Kit. The Optronic Ignition Kit is the
same price for all vehicles, but the fitting kit varies according
to the make and model of the car.
Optronic
Ignition Kit:
| Australian
Customers |
AUD$473
(includes GST) |
| All
Other Customers |
AUD$430 |
Fitting
Kit:
Most fitting
kits are in the range AUD$30 to AUD$50, however
a small number of fitting kits are more.
NOTE:
Prices do not include shipping costs .
Contact
us for a quote and to confirm availability of a
suitable kit for your car's make and model. Specifically, the
make and model number of the DISTRIBUTOR on your car is the most
important for determining whether a kit will fit your car.
|
